Integrated Air Cooled Heat Sink
Datasheets
pdf - 62.98 KB
Brochures
pdf - 2.39 MB
pdf - 547.31 KB
pdf - 1.6 MB
pdf - 1.4 MB
pdf - 1.48 MB
pdf - 1.82 MB
Technical Documents
xlsx - 64.96 KB
pdf - 2.86 MB
pdf - 844.14 KB
pdf - 1.16 MB
pdf - 1.31 MB
-
Technologies
Typically power modules and amplifiers are attached to a heat sink with a multitude of screws together with some form of TIM.
The high thermal barrier at the interface can be eliminated by swaging a multitude of fins into a thick baseplate and then machining the module features and requirements into the baseplate.
Integrated modules can be fabricated using any of the 4 standard fin spacing FF (8.51 mm), DF (6.86 mm), AF (5.49 mm) or MF (8.43 mm).
