Providing the widest range of circuit protection products in the industry means that we offer solutions for everyone from OEMs and panel builders to MROs and electrical contractors either directly or via electrical distributors.
Series
Class J Fuseholders - Class J
Mersen’s connectors fit a wide range of stranded or solid copper
or aluminum conductors. Insulators are either molded glass-filled
polycarbonate (GFPC) or phenolic with verified dielectric strength
in excess of 2500V. All fuse clips are made of high conductivity tinplated
copper designed specifically for 200-600A bladed Class J
fuses.
Read
Product
64001J
Fuse Block 600VAC 600VDC Class J 400A 1-Pole Box Side-Clip
Read
Product
64051J
Fuse Block 600VAC 600VDC Class J 400A 1-Pole Copper Box Side Clip
Read
Product
60355R
Fuse Block 600VAC 600VDC Class R 30A Adder Copper Box
Read
Product
30606T
Fuse Block 300VAC 300VDC Class T 60A 1-Pole Box with Reinforced Clip
Read
Product
34031T
Fuse Block 300VAC 300VDC Class T 400A 1-Pole Box with Reinforced Clip
Read
Product
60355
Fuse Block 600VAC 600VDC Class H/K 30A Adder Copper Box
Read
Product
60305
Fuse Block 600VAC 600VDC Class H/K 30A Adder Box with Reinforced Clip
Read
Product
60618T
Fuse Block 600VAC 600VDC Class T 60A 3-Pole Screw with Reinforced Clip
Read
Series
MULTIFIX® 60mm D0 Vertical Fuse Bases
MULTIFIX® 60 is a system for energy distribution comprising a variety of modular combinable components. The energy distribution is carried out via copper busbars in a 60 mm busbar system up to 630 A, 400 V AC, 500 V AC, 690 V AC, 45–62 Hz. Short circuit withstand tested to VDE 0660 part 500 and IEC 60439-1.
MULTIFIX® 60 is suitable for triple pole, quadruple pole and quintuple pole applications.
The components of the MULTIFIX® 60 system are mounted directly without drilling. This method offers high flexibility for extension and alteration of existing installations -> reduced installation time. D02-vertical switch fuse disconnector 63A, 400VAC, triple pole is installed on to 60 mm busbar directly by snap in mode and automatic interlocking. It is designed for busbars with a width of 12 to 30 mm and a thickness of 5 to 10 mm. Width of switch is only 27 mm which allows space saving, system compatible installation. The Plug technique to EN 50110-1 allows installation without screw caps.
Read
