Phase barriers
Accessories for isolating 2 phases with plastic barrier for NH fuse bases and fuse switch disconnectors
J214690 - BB1-2PPCL
Phase barriers sizes 1 and 2
NEOZED D0 fuse-bases 400VAC
The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them.
This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks.
The D0 fuse-bases are available in the sizes D01, D02 and D03.
This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks.
The D0 fuse-bases are available in the sizes D01, D02 and D03.
D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.
Offset Tag fuse-links gM 550VAC/250VDC
The fuse complies with standard EN 60269-2 section II and standard BS 88 part 2. These fuses are designed for : “General purpose use” motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by other fuses of higher rating in their range. They are screwed into fuseholders or bolted directly onto busbars, or in fuse interruptors disconnectors.
G1019228 - BNIT55V10M16
British Standard fuse-link IEC BS88 gM Type A1 550VAC 250VDC 10M16A BNIT Offset Tag
H1019229 - BNIT55V16M20
British Standard fuse-link IEC BS88 gM Type A1 550VAC 250VDC 16M20A BNIT Offset Tag
J1019230 - BNIT55V20M25
British Standard fuse-link IEC BS88 gM Type A1 550VAC 250VDC 20M25A BNIT Offset Tag
K1019231 - BNIT55V20M32
British Standard fuse-link IEC BS88 gM Type A1 550VAC 250VDC 20M32A BNIT Offset Tag
R1019237 - BNIT55V25M32
British Standard fuse-link IEC BS88 gM Type A1 550VAC 250VDC 25M32A BNIT Offset Tag
Offset Tag fuse-links gM 690VAC/460VDC
The fuse complies with standard EN 60269-2 section II and standard BS 88 part 2. These fuses are designed for : “General purpose use” motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by other fuses of higher rating in their range. They are screwed into fuseholders or bolted directly onto busbars, or in fuse interruptors disconnectors.